收藏本站
The GO element must pass completely through the
crimping chamber. See Figure 5.
4. Align the NO–GO element and try to insert it
straight into the same crimping chamber. The
NO–GO element may start entry, but must not
pass completely through the crimping chamber.
See Figure 5.
Figure 6
The frame assembly ratchet mechanism features an
adjustment wheel with numbered settings. If the dies
do not bottom, adjust the ratchet as follows:
1. Remove the lockscrew from the ratchet
adjustment wheel.
2. With a screwdriver, adjust the ratchet wheel
from the opposite side of the frame.
3. Observe the ratchet adjustment wheel. If the
dies do not bottom, rotate the adjustment wheel
COUNTERCLOCKWISE to a higher–numbered
setting.
4. Replace the lockscrew.
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
Figure 5
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
If the crimping chamber conforms to the gage
inspection, the tool is considered dimensionally
correct, and should be lubricated with a THIN coat of
any good SAE 20 motor oil. If not, the tool must be
returned to Tyco Electronics for further evaluation and
repair. Refer to Section 8, REPLACEMENT.
For additional information regarding the use of a plug
gage, refer to Instruction Sheet 408–7424.
The die assembly should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimping chambers for
flattened, chipped, worn, or broken areas. If damage
or abnormal wear is evident, the tool or dies must be
replaced. See Section 8, REPLACEMENT.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
FCP22N60N MOSFET N-CH 600V 22A TO-220
P51-75-A-AF-D-5V-000-000 SENSOR 75PSI 9/16-18 UNF 1-5V
P51-50-A-AF-D-5V-000-000 SENSOR 50PSI 9/16-18 UNF 1-5V
P51-75-A-AD-D-5V-000-000 SENSOR 75PSI 7/16-20 UNF 1-5V
P51-75-A-AA-D-5V-000-000 SENSOR 75PSI 7/16-20 UNF 1-5V
P51-50-A-AA-D-5V-000-000 SENSOR 50PSI 7/16-20 UNF 1-5V
P51-750-A-Z-D-5V-000-000 SENSOR 750PSI 1/4-18 NPT 1-5V
P51-500-A-Z-D-5V-000-000 SENSOR 500PSI 1/4-18 NPT 1-5V
相关代理商/技术参数
58547 制造商:Brady Corporation 功能描述:
58548-1 功能描述:折皱器 PRO-CRIMPER W/DIE RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper
58548-2 功能描述:冲压机与冲模 DIE ASSEMBLY RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能:
585-48-3 制造商:Fox Electronics 功能描述:SMD,3.2X2.5,HCMOS OSC,-40+85,100PPM,3.3V,48.0000 MHZ - Cut Tape Product
5-854830-0 功能描述:折皱器 CRIMPER INSULATION SP(.110 OV) RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper
5-854830-1 功能描述:折皱器 CRIMPER, INS SPECIAL RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper
5-854830-2 功能描述:折皱器 CRIMPER INSUL. SP. (.160 OV) RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper
5-854830-3 功能描述:折皱器 CRIMPER, SPECIAL INS RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper